Standard or market grade wire mesh

Market grade is a set of commonly used pairings of mesh count and wire diameter, usually available from stock. It is a good place to start when narrowing down a mesh.

28 standard sizes in T-304 stainless steel

2 x 20.0631.6000.437011.10076.4
3 x 30.0541.3720.27937.09570.2
4 x 40.0471.1940.20305.15665.9
5 x 50.0411.0410.15904.03963.2
6 x 60.0350.8890.13173.34462.4
8 x 80.0280.7110.09702.46460.2
10 x 100.0250.6350.07501.90556.3
12 x 120.0230.5840.06031.53252.4
14 x 140.0200.5080.05141.30651.8
16 x 160.0180.4570.04451.13050.7
18 x 180.0170.4320.03860.97948.2
20 x 200.0160.4060.03400.86446.2
24 x 240.0140.3560.02770.70344.1
30 x 300.0120.3050.02130.54241.0
32 x 320.0100.2540.02120.54046.2
35 x 350.0100.2540.01860.47242.3
40 x 400.0100.2540.01500.38136.0
50 x 500.0090.2290.01100.27930.3
60 x 600.00750.1900.00920.23330.3
70 x 700.00650.1650.00780.19829.7
80 x 800.00550.1400.00700.17831.4
90 x 900.0050.1270.00610.15530.3
100 x 1000.00450.1140.00550.14030.3
120 x 1200.00370.0940.00460.11830.9
150 x 1500.00260.0660.00410.10337.2
200 x 2000.00210.0530.00290.07433.6
250 x 2500.00160.0410.00240.06136.0
325 x 3250.00140.0360.00170.04329.7

Mesh count and wire diameter are our standard (market grade) sizes for T-304 stainless steel. Aperture and open area are calculated from those two figures: aperture = 1 ÷ mesh count − wire diameter. Other sizes are made to order.

Market grade in other metals

Each standard size pairs a wire diameter with a mesh opening, and suits a wide range of industrial uses.

The chart is for T-304 stainless steel. Market grade wire mesh is also made in the other metals and alloys we work in.

Wire mesh by material

What is market grade wire mesh?

Market grade wire mesh is a set of commonly used pairings of mesh count and wire diameter. Each standard size pairs one wire diameter with one mesh opening. It is a good place to start when narrowing down a mesh. Sizes outside the chart are made to order.

What sizes does the standard market grade mesh chart cover?

The chart lists 28 standard sizes in T-304 stainless steel, from 2 x 2 to 325 x 325 mesh. Each row gives the mesh count per inch, the wire diameter in inches and millimetres, the aperture in inches and millimetres, and the open area in percent.

How are aperture and open area worked out in the market grade chart?

They are calculated from the mesh count and wire diameter: aperture = 1 ÷ mesh count − wire diameter, in inches. For 10 x 10 mesh with 0.025 in wire, the aperture is 0.0750 in, or 1.905 mm. The open area of that size is 56.3%.

Is market grade wire mesh made in metals other than 304 stainless?

Yes. The chart is for T-304 stainless steel, but market grade wire mesh is also made in the other metals and alloys we work in. The wire mesh by material page lists the mesh in each metal.

Note: sizes, specifications and pictures on this site are for guidance only. They vary with the product, grade and application, so please confirm the details of your order with us.

Get a quote

Tell us the mesh, size and quantity, and we reply with a quote.

What you need
Where to send the quote

We use your details only to reply to this enquiry.